Dosh Spot
 

When you first get your kit or set

Started by plainbearing, November 08, 2017, 06:33:27 am

previous topic - next topic
Go Down

plainbearing

 This is really where you have to start dealing with heavy, weight bearing tracks.5mm, or 5/8th of an inch. Check that the connecting ends are in good condition, and that the switch controllers function smoothly and will fit snugly together.

For obvious safety reasons, make sure that everything is unplugged before you start working with the electrical aspects of laying track. You could read about all the different train rail gauges, and there are plenty of great, highly detailed specifications, drawings, and layouts.

It is a good idea to just use the standard screws that come with it, even if you plan to permanently connecting them. While some Lionel sets include three rail terminals, most common ones have only two.Model train track is measured in gauges, that coincide a great deal with the scale of the model train.

Sounds really confusing doesn t it? Don t worry about that as long as you are sticking to standard scales. For instance,  N  scale is one sixtieth of the size of a full size train.

If you are a beginner, you should be using EZ Track, or Tru Track, so these parts should all just snap together.

There may be other gauges for HO, but they will be clearly defined, like  HON3.

Now no matter what kind of system you use, you will have terminal joiners that will have to have wires connected sliding bearing to them. Now before you hook up anything else, you should make sure you are using a clean sturdy flat surface, even if you are just putting it together to make sure it works.

If you are a beginner, or just a casual hobbyist you don t have to get so technical. You do want to learn the basics the scale letter also give what standard gauge it is.
. For convenience, many new sets just  plug in,  meaning you just strip the ends of the wires and vertical bearing put it in the plug, no muss no fuss.

The  N  stands for nine, which means the 9mm, the distance between the inside of the tracks. These tracks are small, and many of these train layouts will fit in a rather small space.

When you first get your kit or set and want to set up your track design, it is a good idea to open the individual pieces, lay them out on your work surface, and look at the instruction manual. Then you re ready to go. Your most popular scale, HO, has a track width of 16.

It is also a good size if you are thinking about running long strings of cars, since the train cars will be lighter, they will use less electricity. Look at the different designs they have included and lay out the tracks, without attaching anything as of yet.

The only time you may have to deal with this more is when you start getting up into larger model train track gauges, for ΒΌ of 1/8 scale model trains.

You will want to make sure that the tracks lay flat, and don t have any warps in them.  This means that it is HO scale, but has a narrow gauge, and the track gauge is three scale feet wide, rather than the standard real life gauge of 4 , 8  long

Go Up